Installation Instructions
Wire Covers for Rise Garden Gen 3
Step 1
Remove all the white velcro wire ties that secure the grow light cables from the back right leg of your garden.
Step 2 (for short shelves only)
IMPORTANT! Only break off the top section if you are using the wire cover for a short shelf. If using for the bottom shelf or the second/third shelf and you have our shelf risers installed, do not break off the top section of the wire cover.
If you are using the wire cover for a short shelf, then break off the top section, before installing. Keep the top section in case you decide to get our shelf risers in the future. It is not crucial that the two sections of the wire cover be intact for it to work on the tall shelf or shelves with our risers installed.
Step 3
It is recommend to install the wire cover starting from the top shelf and working down, but it is not crucial. To install the wire cover start at the bottom and slide the wire cover over that wire and the leg until it snaps into place.
